Skip to content
English
Create a Ticket
  • There are no suggestions because the search field is empty.

2014+ Sea Doo Spark SeaDek Traction Mats — Install Guide

Sea-Doo · 2014+ Sea-Doo

What's in the Box

Sea-Doo Sea-Doo kit contents
Included parts
Traction Mat Kit Qty 1
Required tools
Alcohol 90%
Rag/ Microfiber
Heat Gun

Installation

1
With compressed air blow out debris and water from your tunnels.
2
With alcohol scrub your entire tunnels and back deck.
3
If you have a Trixx it is recommended to remove the foot stomp pads with a heat gun.
4
It is best to lay out all your traction mats to get an idea of where you want everything to line up. Below is a diagram.
5
Once ready to stick, peel the backing off and lay. Press firmly on the traction mats and around all edges.
Sea-Doo Sea-Doo installation

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.