Skip to content
English
  • There are no suggestions because the search field is empty.

Sea-Doo 2015-2016 900 ACE Stage 1-3R ECU Programming Information — Tuning Guide

Sea-Doo · 2015-2016 Sea-Doo PWC


Performance Features

-Speed Limiter H 95 MPH -Speed Limiter L 55 MPH -High Rev Limit: 9200 RPMS -Low / reverse Rev Limit: 9200 RPMS -Fans on 20 degrees sooner than OEM -TQ limits eliminated -Throttle / E-Gas settings optimized -Fueling adjusted for higher rev limit / additional timing -Ignition advance recalibrated

Tuning Chart
      Stage         Fuel Octane                    Wheel HP                 Engine HP
      Stock              91
               100% Stock components
    Stage 1               91
               Requires: Stock components
   Stage 1.5              91
               Requires: High Flow Air Filter
    Stage 2               91
               Requires: High Flow Muffler
    Stage 3               91
               Requires: High Flow Air Filter, High Flow Muffler
   Stage 3R              100
               Requires: High Flow Air Filter, High Flow Muffler
Sea-Doo Sea-Doo PWC

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.