Skip to content
English
  • There are no suggestions because the search field is empty.

Polaris Xpedition CVT Intake Tube — Install Guide

Polaris · Xpedition · SKU 203FP

What's in the Box

Polaris Xpedition kit contents
Included parts
CVT Intake Tube Qty 1
90/110 12mm Wide Clamps Qty 2
Required tools
8mm Socket
Screwdriver

Installation

1
With a screwdriver or 8mm socket, remove (2) worm drive clamps one the belt cover and upper part of the 90 degree rubber.
2
Remove the OEM CVT intake duct.
Polaris Xpedition installation
3
Install the new CVT Intake duct with suppled clamps.
Polaris Xpedition installation

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.