Skip to content
English
Create a Ticket
  • There are no suggestions because the search field is empty.

Polaris RZR 200 Kickplate Kit — Install Guide

Polaris · RZR · SKU 925FP0193 (white), 925FP0194 (red), 925FP0195 (black)

What's in the Box

Polaris RZR kit contents
Included parts
Set of Kickplates Qty 1
Required tools
T-40 Socket

Installation

1
Remove (6) screws holding the OEM lower plastic to the car. (2) screws are located underneath the door, it helps to open the door.
Polaris RZR installation
2
Install the EVP kick plate onto the vehicle. Reuse OEM hardware and fasten down.
Polaris RZR installation

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.