Sea-Doo Spark Arrestor Installation — Install Guide
Sea-Doo · SKU (2.5”) 300DU0169, (3.0”) 300DU0170
What's in the Box
Included parts
EVP Spark Arrestor
Qty 1
Required tools
5mm Allen Wrench
Installation
1
Make sure the vehicle is cold and in park.
2
You will find the spark arrester on the exhaust exit, remove the 5mm Allen.
3
Place the new spark arrestor into the exhaust and tighten the 5mm Allen.
1
Make sure the vehicle is cold and in park.
2
Open the utility box.
3
Remove the (3) bolts holding the exhaust tip on. Remove the exhaust tip and gasket.
4
Inside the exhaust tip, you will find the spark arrestor. Replace the spark arrestor.
5
Install the gasket and (3) bolts mounting the tip to the muffler.
6
Close the utility box.