Skip to content
English
Create a Ticket
  • There are no suggestions because the search field is empty.

Can-Am X3 Billet Grab Handle — Install Guide

Can-Am · Maverick X3 · SKU 925FC0002

What's in the Box

Can-Am Maverick X3 kit contents
Included parts
EVP Billet Grab Handle Qty 1
INSTALLTION STEPS:
Required tools
T-30 Socket
5mm Allen Wrench
Medium Strength Thread Lock

Installation

1
Use your T30 wrench to remove the screw on top of factory grab handle.
Can-Am Maverick X3 installation
2
Pull up on the factory handle to remove it from your machine.
Can-Am Maverick X3 installation
3
Apply a small amount of medium strength thread lock to the 6mm screw provided.
Can-Am Maverick X3 installation
4
Position the EVP Grab Handle so it comfortably fits your hand then tighten the screw.
Can-Am Maverick X3 installation

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.