Skip to content
English
Create a Ticket
  • There are no suggestions because the search field is empty.

Can-Am X3 Primary Clutch Bolt — Install Guide

Can-Am · Maverick X3 · SKU 404FC0018

What's in the Box

Can-Am Maverick X3 kit contents
Included parts
EVP Primary Clutch Bolt Qty 1
Performance F
• 2mm large
passes throug
engaging the
more torque h
• Made from
withstand 220
• More thre
to prevent st
• Reuses th
Required tools
Torque Wrench
22mm Socket
eatures
r OD than the OEM bolt where it
h the puller threads before
crankshaft which equates to 50%
olding capability.
heat treated ARP 2000 and can
,000PSI.
ad engagement on the crankshaft
ripping out the threads.
e OEM clutch washer.

Installation

1
Remove OEM bolt.
2
Install new EVP primary clutch bolt.
3
With a torque wrench and a 22mm socket, torque the bolt to 115 ft-lbs.

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.