Skip to content
English
Create a Ticket
  • There are no suggestions because the search field is empty.

Can-Am X3 Secondary Clutch Roller Pin Puller — Install Guide

Can-Am · Maverick X3 · SKU 875FC0002, Replacement Tips (875FC0009)

What's in the Box

Can-Am Maverick X3 kit contents
Included parts
M4 Set Screw Qty 2
M4 Hex Nut Qty 1
1/2" Hex Nut Qty 1
1/2" Flat Washer Qty 1
Puller Plate Qty 1
Puller Bolt Qty 1
Required tools
3/4" Open End Wrench
3/4” Socket
T-20 Torx
7mm Hex Wrench
5/16” Poll Punch

Installation

1
Install 1/2" hex nut on puller bolt and thread all the way to the top of the threads. ○ Adding a little grease to the threads will help prevent thread deterioration and ease use.
2
Install 1/2" flat washer.
3
Install M4 set screw in the end of the puller bolt. Tighten with 7mm hex wrench.
4
Install M4 hex nut and thread to the base of the puller bolt and tighten.

Note: This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise- regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.